Bike Rack
Bike 100%
PRODUCT LINE_ Standard
-
PRODUCT DESCRIPTION
SPECIFICATION
TECHNOLOGIES
PRODUCT GALLERY
-
Made in EU24 Months Guarantee
PRODUCT DESCRIPTION_
The bikes rack a professional rack designed to store bikes of different categories and sizes. The product is made of high-quality powder-coated galvanised steel, guaranteeing durability and resistance to corrosion.
SPECIFICATION_
LENGTH MM | CAPACITY number of bikes |
1500 | max 7 |
1800 | max 8 |
2000 | max 9 |
2400 | max 12 |
HEIGHT 1700 mm | WIDTH 1250 mm |
DOUBLE PROTECTION
DURABILITY & PROTECTION AGAINST CORROSION
The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the
ADJUSTMENT SYSTEMS
OPTIMAL USE OF AVAILABLE SPACE
QBL products are designed to allow, as much as possible, for the individual components to be adapter to the types and sizes of equipment they store. Thanks to smart functional solutions, adapting the location of the forks, adjusting the mounting height of the levels, shelves or aluminium crossbars is very simple and intuitive. Adjustment systems mean optimal use of the available space – which translates directly into increased storage capacity.
BIKE-HOLDING SYSTEM
A DEDICATED SOLUTION FOR BIKE STORAGE FACILITIES
The system of holding bikes in a vertical position has a complex steel structure that allows for the best spacesaving storage of bicycles. The lower structural elements, mounted on the rack frame, stabilise the rear wheel and prevent it from tilting horizontally. The upper handles, which are mounted on the crossbar, keep the wheels in a twisted position – for better stability, safety and for ergonomic storage. The exceptional capacity of the system is ensured by the fact that bicycles mounted on both sides of the rack can pass each other and by the diagonal position of the handle and the front wheel. The height of the crossbar and the positions of the upper and lower handles are adjusted to the dimensions of the stored bicycles.
RUNNING SYSTEM
SPACE SAVING, MOBILE & CONVENIENT
The running system of QBL products includes a rail set or a set of swivel casters. The rail set consists of stainless steel rails 2 or 3mm thick (depending on the length of the racks), connectors, rail endings, and 12 standard bearings attached to each frame of rack or dryer. The design of the rails and the number of bearings used guarantee smooth and safe movement of the products – even when fully loaded. The set of swivel casters includes four durable casters (with a diameter of 75, 80 or 125mm) which are selected according to the needs and the maximum possible load on the structure.
FRAME
RIGID STRUCTURE, SAFETY OF USE
All racks and dryers in the rail system are equipped with a structural frame made of 3mm-thick steel, which is their load-bearing base and ensures the rigidity and stability of the entire system. The frame also acts as a running structure, ensuring safe and even guidance of products on the rails. The frame is double protected against corrosion – it is made of galvanised steel and covered with a layer of powder coating.
TECHNOLOGIES_
DOUBLE PROTECTION
DURABILITY & PROTECTION AGAINST CORROSION
ADJUSTMENT SYSTEMS
OPTIMAL USE OF AVAILABLE SPACE
BIKE-HOLDING SYSTEM
A DEDICATED SOLUTION FOR BIKE STORAGE FACILITIES
RUNNING SYSTEM
SPACE SAVING, MOBILE & CONVENIENT
FRAME
RIGID STRUCTURE, SAFETY OF USE