close
OPENING NOZZLE SYSTEM

OPENING NOZZLE SYSTEM

INCREASED EFFICIENCY & ENERGY-SAVING

The aluminium or steel arms are finished with a specially designed nozzles comprised of a spring and a plastic ending – different for each type of dried equipment – footwear, helmets and gloves. The nozzles activate when the equipment is placed on the arm, which – by pressing the spring – opens the air supply from the dryer. When the equipment is removed, the nozzle system automatically closes, preventing heated air from escaping ineffectively to the outside. Additional openings at the base of the arms allow air to be forced into the upper parts of the boots. The open nozzle system contributes to a significant increase in drying performance and energy efficiency.

close
SHELVES WITH HEATING MODULES

SHELVES WITH HEATING MODULES

HIGH PRESSURE AIR FLOW COMING DOWN FROM EACH SHELF

The Wind model of dryers use a heating system based on separate modules – each consisting of a fan and a heater. The drying modules are placed in 9 of the 11 shelves (excluding the lowest mounted shelf on each side). The shape of their structure and the high efficiency of the fans used ensure a sufficiently high pressure of the air flow. The bottom surface of each shelf has numerous openings through which heated air is blown into the boots placed below. The shelves are made of galvanised steel and their fixing height can be adjusted to the size of the stored boots. Units with shelves and built-in heating modules combine the functions of dryers and storage racks.

close
TWO ENERGY-SAVING MODES

TWO ENERGY-SAVING MODES

IDEAL FOR APARTMENTS – QUIET NIGHT MODE & EFFICIENT DAY MODE

Supreme drying units are based on a heating system that consists of an energy-efficient heating cable and a small fan (Supreme Hybrid version). Two stainless, backlit buttons located in the housing correspond to the two alternative operating modes of the system. The first is an 8-hour silent night mode, in which the heating cable heats the steel tubing on which the boots are worn; the second is a 4-hour day mode, in which the heating cable and fan run simultaneously (short drying before the next ski adventure). At the end of the programmed time, the dryer's heating functions automatically stop.

close
TOUCHSCREEN

TOUCHSCREEN

COMMUNICATION BETWEEN THE USER & THE DEVICE

Double-sided boot dryers – Optiflow, Force and Wind models – are operated through 5"colourful touchscreen built into the side wall of the main control cabinet. A large, sensitive display and an intuitive application make navigating the menu and managing all available functions of the device very simple and friendly. In addition to a range of functions of the dryer, the screen allows you to select, among other things, one of the six available language versions. There is also an automatic ‘lock screen’ function to prevent unauthorised control of the device. The communication between the user and the Panel models is ensured by a touchscreen 3.5".

close
ELECTRONIC CONTROL

ELECTRONIC CONTROL

OPTIMISATION & OPERATIONAL EFFICIENCY

The electronic dryer control system allows efficient and customised operation of the dryers. Its functionality is demonstrated by the availability of multiple useful settings and intuitive control of individual functions of the device (e.g. heating temperature, disinfection or time controller). The double-sided dryer models are divided into three independent segments. The operation of each of them can be adjusted individually by stopping their work or by setting one of three modes: fan, fan with heaters and work according to pre-set time intervals. The timer function allows individual operating modes to be set for each hour of each day of the week separately. The electronic control system helps to optimise the operation of the appliance while increasing drying efficiency and energy savings.

close
DRYING EFFICIENCY

DRYING EFFICIENCY

CAREFULLY DESIGNED SYSTEMS & SELECTED COMPONENTS

The drying systems consist of highquality industrial components – durable and adapted to continuous, uninterrupted operation. Each of the components used – and which affect the efficiency of the dryer (i.e. primarily heaters and fans) – were subjected to long-term tests, also in conditions of increased humidity and a wide range of ambient temperatures. Careful selection of individual elements with specific performance parameters, as well as optimal selection of their configuration, number, or appropriate location in the construction of the equipment – ensure the dryers’ (especially double-sided models) exceptional durability and drying efficiency. It is possible to use components suitable for electric networks with different parameters (including 110-120V AC).

close
DISINFECTION SYSTEM

DISINFECTION SYSTEM

TWO PROVEN METHODS FOR DISINFECTING EQUIPMENT

Larger dryer models can be equipped with an internal boot disinfection system or a high-quality UV lamp. The built-in disinfection system consists of a tank, a dosing pump, supply pipes and nozzles spraying liquid particles inside the device, which are forced into the boots together with air. Operation of the disinfection system is only possible in fan mode and is controlled via the touchscreen and menu control system. The long-life lamp is mounted inside the structure of dryers, continuously emitting Type C ultraviolet waves (UV-C) with germicidal properties.

close
PROTECTION SYSTEM

PROTECTION SYSTEM

SAFETY OF USE

Protection of electrical systems against overheating and damage to components in each dryer for boots, helmets or gloves is ensured by a bi-metal thermal protection system. The Force, Optiflow, Wind and Panel models are additionally equipped with independent systems of programmable thermal protection – thanks to which, the heating systems are automatically cooled down in the event of a failure or a sudden, undesirable shutdown of the device. All models of QBL dryers and all carefully selected components have CE declarations of conformity.

TECHNOLOGY

SHOP DISPLAY SYSTEMS

Shop Display Systems

SHOP DISPLAY SYSTEMS

The LINE OF DISPLAY PRODUCTS IS DESIGNED FOR SPORTS SHOPS

Explore
DEPOT LOCKERS SEQUENCE

DEPOT LOCKERS SEQUENCE

DEPOT LOCKERS SEQUENCE

modern methods of storing and drying ski equipment

Explore
CLIQ SKI HOLDER

CLIQ SKI HOLDER

CLIQ SKI HOLDER

DESIGNED TO MAXIMISE THE STORAGE FUNCTIONALITY OF YOUR SKIS

Explore
BOARD DECORS & COLORS

BOARD DECORS & COLORS

BOARD DECORS & COLORS

individual matching of the appearance of products

Explore

8 ITEMS

OPENING NOZZLE SYSTEM

Dryers

OPENING NOZZLE SYSTEM

INCREASED EFFICIENCY & ENERGY-SAVING

SHELVES WITH HEATING MODULES

Dryers

SHELVES WITH HEATING MODULES

HIGH PRESSURE AIR FLOW COMING DOWN FROM EACH SHELF

TWO ENERGY-SAVING MODES

Dryers

TWO ENERGY-SAVING MODES

IDEAL FOR APARTMENTS – QUIET NIGHT MODE & EFFICIENT DAY MODE

TOUCHSCREEN

Dryers

TOUCHSCREEN

COMMUNICATION BETWEEN THE USER & THE DEVICE

ELECTRONIC CONTROL

Dryers

ELECTRONIC CONTROL

OPTIMISATION & OPERATIONAL EFFICIENCY

DRYING EFFICIENCY

Dryers

DRYING EFFICIENCY

CAREFULLY DESIGNED SYSTEMS & SELECTED COMPONENTS

DISINFECTION SYSTEM

Dryers

DISINFECTION SYSTEM

TWO PROVEN METHODS FOR DISINFECTING EQUIPMENT

PROTECTION SYSTEM

Dryers

PROTECTION SYSTEM

SAFETY OF USE