PRODUCT DESCRIPTION_

Given its exceptionally large capacity, Snowboard Rental rack is designed for bigger rental shops. The construction of the lower part of the rack consists of a steel basket for storing snowboard rental bindings or other gear. The upper part includes a hood and aluminum crossbars with special plastic grips. The grips are used to stabilize snowboards in a vertical position. They are arranged in equal small distance from one another so that the capacity of the rack is large and the space is used efficiently. Regulated height of the aluminum crossbars allows storing snowboards of different sizes – from junior to longest adult boards. For a more robust construction and storage efficiency, 2000 and 2400mm racks are equipped with an additional column in the middle that divides the storage space into two parts.

Product Datasheet QBL Catalogue Ski Rental & Service'24

SPECIFICATION_

LENGTH MM CAPACITY snowboards
1500 60
1800 80
2000 80
2400 100
3000 120
4000 160

*Boards with rental bindings

close
DOUBLE PROTECTION

DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the
close
FOUR VISUAL LINES

FOUR VISUAL LINES

DIVERSE DESIGN OF THE FRONT PANEL

The main rack and dryer models are available in four different visual options which differ in the design of the front column. The Standard line is featured by a classic anthracite frontside, whilst the MiniPanel line by a modern white panel with a contrasting solid handle. The Panel line is distinguished by a wide, elegant board with an oval stainless-steel handle attached to it; the UniQ line offers unlimited possibilities for the selection of materials, which includes a delicate casing of a wide front column with a comfortable inner handle. The choice of different visual lines enables QBL products to be properly matched to the interior design and character of the facility in which they are used.
close
ADJUSTMENT SYSTEMS

ADJUSTMENT SYSTEMS

OPTIMAL USE OF AVAILABLE SPACE

QBL products are designed to allow, as much as possible, for the individual components to be adapter to the types and sizes of equipment they store. Thanks to smart functional solutions, adapting the location of the forks, adjusting the mounting height of the levels, shelves or aluminium crossbars is very simple and intuitive. Adjustment systems mean optimal use of the available space – which translates directly into increased storage capacity.
close
GRIP OF SNB_ 3-POINT SYSTEM

GRIP OF SNB_ 3-POINT SYSTEM

VERTICAL STORAGE WITH EXCEPTIONAL CAPACITY

The technique of holding snowboards in a vertical position is based on a three-point contact system of the rack with the edge of the snowboard, ensuring not only a firm hold of the equipment, but also the safety of its storage. The system consists of upper and lower aluminium crossbars with blue plastic elements attached to them as partitions between boards, and a galvanised steel hood. The hood has a channel that drains water away from the rack. The storage of snowboards in a vertical position brings extraordinary capacity and functionality. The mounting positions of the crossbars which hold the boards can be adjusted to suit the size of the equipment stored.
close
STEEL BOX

STEEL BOX

SPACIOUS EXTRA STORAGE CAPACITY FOR BINDINGS OR OTHER ACCESSORIES

The capacious steel basket is made of 1mm-thick perforated sheet metal covered with powder coating. Thanks to additional zinc protection, it is resistant to moisture. The basket is located on a frame at the bottom of the rack and is intended for storing rental snowboard bindings, helmets and other types of gear. The interior structure is open, or – on request – divided, thus allowing different categories or sizes of equipment to be stored in separate compartments.
close
RUNNING SYSTEM

RUNNING SYSTEM

SPACE SAVING, MOBILE & CONVENIENT

The running system of QBL products includes a rail set or a set of swivel casters. The rail set consists of stainless steel rails 2 or 3mm thick (depending on the length of the racks), connectors, rail endings, and 12 standard bearings attached to each frame of rack or dryer. The design of the rails and the number of bearings used guarantee smooth and safe movement of the products – even when fully loaded. The set of swivel casters includes four durable casters (with a diameter of 75, 80 or 125mm) which are selected according to the needs and the maximum possible load on the structure.
close
FRAME

FRAME

RIGID STRUCTURE, SAFETY OF USE

All racks and dryers in the rail system are equipped with a structural frame made of 3mm-thick steel, which is their load-bearing base and ensures the rigidity and stability of the entire system. The frame also acts as a running structure, ensuring safe and even guidance of products on the rails. The frame is double protected against corrosion – it is made of galvanised steel and covered with a layer of powder coating.
close
WATER HOOD

WATER HOOD

WATER DRAINAGE & SUPPORT POINT FOR SKIS AND SNOWBOARDS

The water hood is made of galvanised steel or (optionally) stainless steel with a thickness of 1.5mm, thus maintaining its anti-corrosion properties. It is located on a frame designed with a slight angle of inclination so that dripping water from skis or snowboards does not accumulate but flows away through the hood channel outside the rack and its rail system. The thoughtful design of the water hood not only drains water, but is also a component of the three-point holding system for skis and snowboards.

TECHNOLOGIES_

DOUBLE PROTECTION
DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

FOUR VISUAL LINES
FOUR VISUAL LINES

DIVERSE DESIGN OF THE FRONT PANEL

ADJUSTMENT SYSTEMS
ADJUSTMENT SYSTEMS

OPTIMAL USE OF AVAILABLE SPACE

GRIP OF SNB_ 3-POINT SYSTEM
GRIP OF SNB_ 3-POINT SYSTEM

VERTICAL STORAGE WITH EXCEPTIONAL CAPACITY

STEEL BOX
STEEL BOX

SPACIOUS EXTRA STORAGE CAPACITY FOR BINDINGS OR OTHER ACCESSORIES

RUNNING SYSTEM
RUNNING SYSTEM

SPACE SAVING, MOBILE & CONVENIENT

FRAME
FRAME

RIGID STRUCTURE, SAFETY OF USE

WATER HOOD
WATER HOOD

WATER DRAINAGE & SUPPORT POINT FOR SKIS AND SNOWBOARDS

FRONT BOARD DECORS_

LR33

CLEAF

SABLÈ ABBEY

LR33

s072

Cleaf

SHERWOOD KENSINGTON PARK

s072

S120

Cleaf

PEMBROKE THAMES

S120

S060

cleaf

ENGADINA ADULA

S060

S061

Cleaf

ENGADINA BEVERIN

S061

S071

Cleaf

SHERWOOD GREENWICH PARK

S071

U129

Cleaf

MILLENNIUM NERO

U129

H1122

Egger

WHITEWOOD

H1122

H1176

Egger

EGGER WHITE HALIFAX OAK

H1176

H1180

egger

NATURAL HALIFAX OAK

H1180

H1113

Egger

BROWN KANSAS OAK

H1113

H3058

Egger

MALI WENGE

H3058

H1487

Egger

Bramberg Pine

H1487

H3309

Egger

Gladstone Oak

H3309

H3331

Egger

NATURAL NEBRASKA OAK

H3331

YOU MAY LIKE ALSO_