Dofinansowanie EU

Wall Ski Level

Skis 100%

PRODUCT LINE_ Standard

SPECIFICATION_

WIDTH MM CAPACITY pairs of skis DEPTH MM
1000 12 400
1250 15 400
1500 18 400
close
DOUBLE PROTECTION

DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the
close
WALL MOUNTING

WALL MOUNTING

ARRANGING WALL SPACE FOR STORAGE OR DRYING PURPOSES

Lighter storage systems such as levels for skis, poles or snowboards and one-sided dryers with smaller capacities are designed to be hung on the wall. Thanks to this solution, virtually any available space in the rental shop, storage room or apartment can be used more effectively. One-sided steel structures have special fastenings, allowing simple and safe hanging of products on pegs anchored into the wall – at any height and adjusted to the size of the stored equipment.
close
Adjustable structural systems

Adjustable structural systems

Optimal use of available space

QBL products are designed to allow, as much as possible, for the individual components to be adapter to the types and sizes of equipment they store. Thanks to smart functional solutions, adapting the location of the forks, adjusting the mounting height of the levels, shelves or aluminium crossbars is very simple and intuitive. Adjustment systems mean optimal use of the available space – which translates directly into increased storage capacity.
close
GRIP OF SKIS_ FORK SYSTEM

GRIP OF SKIS_ FORK SYSTEM

BY FAR THE MOST SPACEEFFICIENT HOLDING SYSTEM

The fork-based system is the most capacious way to store skis. The forks are made of 3mm-thick steel and four steel tubes to hang the skis on. The surface of the forks is covered with a rubber coat, which has anti-slip properties and effectively protects them from scratches. The forks are fixed at any distance on the steel levels – allowing maximum use of the available space on the rack. The structure has been designed in such a way that, thanks to the gentle slope of the steel tubes, the risk of equipment falling out during dynamic movement or collision of the racks is reduced. Each fork can safely store two to three pairs of senior skis.

TECHNOLOGIES_

DOUBLE PROTECTION
DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

WALL MOUNTING
WALL MOUNTING

ARRANGING WALL SPACE FOR STORAGE OR DRYING PURPOSES

Adjustable structural systems
Adjustable structural systems

Optimal use of available space

GRIP OF SKIS_ FORK SYSTEM
GRIP OF SKIS_ FORK SYSTEM

BY FAR THE MOST SPACEEFFICIENT HOLDING SYSTEM

YOU MAY LIKE ALSO_