The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the

Lighter storage systems such as levels for skis, poles or snowboards and one-sided dryers with smaller capacities are designed to be hung on the wall. Thanks to this solution, virtually any available space in the rental shop, storage room or apartment can be used more effectively. One-sided steel structures have special fastenings, allowing simple and safe hanging of products on pegs anchored into the wall – at any height and adjusted to the size of the stored equipment.

The aluminium or steel arms are finished with a specially designed nozzles comprised of a spring and a plastic ending – different for each type of dried equipment – footwear, helmets and gloves. The nozzles activate when the equipment is placed on the arm, which – by pressing the spring – opens the air supply from the dryer. When the equipment is removed, the nozzle system automatically closes, preventing heated air from escaping ineffectively to the outside. Additional openings at the base of the arms allow air to be forced into the upper parts of the boots. The open nozzle system contributes to a significant increase in drying performance and energy efficiency.

The drying systems consist of highquality industrial components – durable and adapted to continuous, uninterrupted operation. Each of the components used – and which affect the efficiency of the dryer (i.e. primarily heaters and fans) – were subjected to long-term tests, also in conditions of increased humidity and a wide range of ambient temperatures. Careful selection of individual elements with specific performance parameters, as well as optimal selection of their configuration, number, or appropriate location in the construction of the equipment – ensure the dryers’ (especially double-sided models) exceptional durability and drying efficiency. It is possible to use components suitable for electric networks with different parameters (including 110-120V AC).

Protection of electrical systems against overheating and damage to components in each dryer for boots, helmets or gloves is ensured by a bi-metal thermal protection system. The Force, Optiflow, Wind and Panel models are additionally equipped with independent systems of programmable thermal protection – thanks to which, the heating systems are automatically cooled down in the event of a failure or a sudden, undesirable shutdown of the device. All models of QBL dryers and all carefully selected components have CE declarations of conformity.