Boot Dryer Optiflow
boots 100%
PRODUCT LINE_ MiniPanel
PRODUCT DESCRIPTION_
Boot Dryer Optiflow is the most advanced QBL dryer, which connects attractive design, high drying efficiency and outstanding ergonomics. Thanks to the smart construction the width of the device is limited to 50cm, what saves loads of presious space in ski rentals and depots. The electrical system is divided into three segments, and it is made of high-quality components designed for continuous operation. All functions of the dryer are controlled using a touchscreen. Using a few buttons you can set the operating mode of each segment, its air temperature and drying times. The arms, on which boots are placed, are replaceable and equipped with nozzles with a spring which opens air supply only when a boot is placed on the arm. The function of controlling the segments, adjusting working hours and the open-close nozzle system contribute substantially to the high effectiveness of drying and energy efficiency of the device.
QBL Catalogue Ski Rental & Service'24
SPECIFICATION_
| LENGTH MM | CAPACITY pairs of boots | POWER CONSUMPTION* W |
| 1500 | 44 | 550/7150 |
| 1800 | 55 | 550/7150 |
| 2000 | 66 | 550/7150 |
| 2400 | 77 | 550/7150 |
| 3000 | 99 | 550/7150 |
| 4000 | 132 | 550/7150 |
| HEIGHT 2420 mm | WIDTH 500 mm | VOLT.* 230/3x400 V |
*without heating / with heating
DOUBLE PROTECTION
DURABILITY & PROTECTION AGAINST CORROSION
The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the
FOUR VISUAL LINES
DIVERSE DESIGN OF THE FRONT PANEL
The main rack and dryer models are available in four different visual options which differ in the design of the front column. The Standard line is featured by a classic anthracite frontside, whilst the MiniPanel line by a modern white panel with a contrasting solid handle. The Panel line is distinguished by a wide, elegant board with an oval stainless-steel handle attached to it; the UniQ line offers unlimited possibilities for the selection of materials, which includes a delicate casing of a wide front column with a comfortable inner handle. The choice of different visual lines enables QBL products to be properly matched to the interior design and character of the facility in which they are used.
RUNNING SYSTEM
SPACE SAVING, MOBILE & CONVENIENT
The running system of QBL products includes a rail set or a set of swivel casters. The rail set consists of stainless steel rails 2 or 3mm thick (depending on the length of the racks), connectors, rail endings, and 12 standard bearings attached to each frame of rack or dryer. The design of the rails and the number of bearings used guarantee smooth and safe movement of the products – even when fully loaded. The set of swivel casters includes four durable casters (with a diameter of 75, 80 or 125mm) which are selected according to the needs and the maximum possible load on the structure.
WATER TUB
WATER COLLECTION – THE OMFORT OF A DRY FLOOR
Racks and dryers with an open interior of the frame can be optionally equipped with a steel tub with a rubber mat, which serves for collecting water and dirt dripping from stored skis, snowboards or dried boots. The tub is made of galvanised steel, thus maintaining its resistance to corrosion. Adjusting the structure to the frames of the racks and dryers allows for easy removal and emptying. The use of the tub reduces moisture and dirt on the floor and in the area of the rail system.
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING
The aluminium or steel arms are finished with a specially designed nozzles comprised of a spring and a plastic ending – different for each type of dried equipment – footwear, helmets and gloves. The nozzles activate when the equipment is placed on the arm, which – by pressing the spring – opens the air supply from the dryer. When the equipment is removed, the nozzle system automatically closes, preventing heated air from escaping ineffectively to the outside. Additional openings at the base of the arms allow air to be forced into the upper parts of the boots. The open nozzle system contributes to a significant increase in drying performance and energy efficiency.
TOUCHSCREEN
COMMUNICATION BETWEEN THE USER & THE DEVICE
Double-sided boot dryers – Optiflow, Force and Wind models – are operated through 5"colourful touchscreen built into the side wall of the main control cabinet. A large, sensitive display and an intuitive application make navigating the menu and managing all available functions of the device very simple and friendly. In addition to a range of functions of the dryer, the screen allows you to select, among other things, one of the six available language versions. There is also an automatic ‘lock screen’ function to prevent unauthorised control of the device. The communication between the user and the Panel models is ensured by a touchscreen 3.5".
ELECTRONIC CONTROL
OPTIMISATION & OPERATIONAL EFFICIENCY
The electronic dryer control system allows efficient and customised operation of the dryers. Its functionality is demonstrated by the availability of multiple useful settings and intuitive control of individual functions of the device (e.g. heating temperature, disinfection or time controller). The double-sided dryer models are divided into three independent segments. The operation of each of them can be adjusted individually by stopping their work or by setting one of three modes: fan, fan with heaters and work according to pre-set time intervals. The timer function allows individual operating modes to be set for each hour of each day of the week separately. The electronic control system helps to optimise the operation of the appliance while increasing drying efficiency and energy savings.
DRYING EFFICIENCY
CAREFULLY DESIGNED SYSTEMS & SELECTED COMPONENTS
The drying systems consist of highquality industrial components – durable and adapted to continuous, uninterrupted operation. Each of the components used – and which affect the efficiency of the dryer (i.e. primarily heaters and fans) – were subjected to long-term tests, also in conditions of increased humidity and a wide range of ambient temperatures. Careful selection of individual elements with specific performance parameters, as well as optimal selection of their configuration, number, or appropriate location in the construction of the equipment – ensure the dryers’ (especially double-sided models) exceptional durability and drying efficiency. It is possible to use components suitable for electric networks with different parameters (including 110-120V AC).
PROTECTION SYSTEM
SAFETY OF USE
Protection of electrical systems against overheating and damage to components in each dryer for boots, helmets or gloves is ensured by a bi-metal thermal protection system. The Force, Optiflow, Wind and Panel models are additionally equipped with independent systems of programmable thermal protection – thanks to which, the heating systems are automatically cooled down in the event of a failure or a sudden, undesirable shutdown of the device. All models of QBL dryers and all carefully selected components have CE declarations of conformity.
TECHNOLOGIES_
DOUBLE PROTECTION
DURABILITY & PROTECTION AGAINST CORROSION
FOUR VISUAL LINES
DIVERSE DESIGN OF THE FRONT PANEL
RUNNING SYSTEM
SPACE SAVING, MOBILE & CONVENIENT
WATER TUB
WATER COLLECTION – THE OMFORT OF A DRY FLOOR
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING
TOUCHSCREEN
COMMUNICATION BETWEEN THE USER & THE DEVICE
ELECTRONIC CONTROL
OPTIMISATION & OPERATIONAL EFFICIENCY
DRYING EFFICIENCY
CAREFULLY DESIGNED SYSTEMS & SELECTED COMPONENTS
PROTECTION SYSTEM
SAFETY OF USE
