Mix

Skis 50% | Helmets & boots 50%

PRODUCT LINE_ MiniPanel

PRODUCT DESCRIPTION_

The construction of the Mix rack consists of a frame, two columns, one two-sided steel crossbar for ski forks in the lower part and four or five shelves in the upper part. The rack can be therefore used for storing skis and helmets, junior boots or other accessories. Each ski fork is covered with a special anti-slip rubber coat and can accommodate up to three pairs of skis. The regulated height of the crossbar and the shelves enables adjusting the distance between them to the size of the gear. The shelves are located at 88° angle preventing helmets and junior boots from falling out during movement.

Product Sheet QBL Catalogue Ski Rental & Service'24

SPECIFICATION_

LENGTH MM CAPACITY*
1500 30+30/25
1800 36+35/30
2000 42+40/35
2400 54+50/30
3000 66+60/50
4000 108+80/70

*Pairs of skis + helmets / pairs of junior boots

close
DOUBLE PROTECTION

DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the
close
FOUR VISUAL LINES

FOUR VISUAL LINES

DIVERSE DESIGN OF THE FRONT PANEL

The main rack and dryer models are available in four different visual options which differ in the design of the front column. The Standard line is featured by a classic anthracite frontside, whilst the MiniPanel line by a modern white panel with a contrasting solid handle. The Panel line is distinguished by a wide, elegant board with an oval stainless-steel handle attached to it; the UniQ line offers unlimited possibilities for the selection of materials, which includes a delicate casing of a wide front column with a comfortable inner handle. The choice of different visual lines enables QBL products to be properly matched to the interior design and character of the facility in which they are used.
close
ADJUSTMENT SYSTEMS

ADJUSTMENT SYSTEMS

OPTIMAL USE OF AVAILABLE SPACE

QBL products are designed to allow, as much as possible, for the individual components to be adapter to the types and sizes of equipment they store. Thanks to smart functional solutions, adapting the location of the forks, adjusting the mounting height of the levels, shelves or aluminium crossbars is very simple and intuitive. Adjustment systems mean optimal use of the available space – which translates directly into increased storage capacity.
close
GRIP OF SKIS_ FORK SYSTEM

GRIP OF SKIS_ FORK SYSTEM

BY FAR THE MOST SPACEEFFICIENT HOLDING SYSTEM

The fork-based system is the most capacious way to store skis. The forks are made of 3mm-thick steel and four steel tubes to hang the skis on. The surface of the forks is covered with a rubber coat, which has anti-slip properties and effectively protects them from scratches. The forks are fixed at any distance on the steel levels – allowing maximum use of the available space on the rack. The structure has been designed in such a way that, thanks to the gentle slope of the steel tubes, the risk of equipment falling out during dynamic movement or collision of the racks is reduced. Each fork can safely store two to three pairs of senior skis.
close
ERGONOMIC SHELVES

ERGONOMIC SHELVES

MORE STORAGE POSSIBILITIES

Shelves are the main component of some products, but they are also a very useful optional accessory for virtually every model of the rack. Thanks to their design and dimensions, they are perfect for storing helmets, boots and many other accessories. Additionally, the solution of mounting them at a slight angle reduces the risk of equipment falling out when the racks are dynamically moved or collided. With the adjustment systems in the racking columns, the mounting heights of the shelves and the spacing between them can be adapted to the size of the equipment stored. The edges of the shelves have been rounded off to avoid stripping the equipment and to prevent hand injuries when taking boots from the rack. The shelves are made of highquality 1.5mm galvanised steel and are powder-coated.
close
RUNNING SYSTEM

RUNNING SYSTEM

SPACE SAVING, MOBILE & CONVENIENT

The running system of QBL products includes a rail set or a set of swivel casters. The rail set consists of stainless steel rails 2 or 3mm thick (depending on the length of the racks), connectors, rail endings, and 12 standard bearings attached to each frame of rack or dryer. The design of the rails and the number of bearings used guarantee smooth and safe movement of the products – even when fully loaded. The set of swivel casters includes four durable casters (with a diameter of 75, 80 or 125mm) which are selected according to the needs and the maximum possible load on the structure.
close
FRAME

FRAME

RIGID STRUCTURE, SAFETY OF USE

All racks and dryers in the rail system are equipped with a structural frame made of 3mm-thick steel, which is their load-bearing base and ensures the rigidity and stability of the entire system. The frame also acts as a running structure, ensuring safe and even guidance of products on the rails. The frame is double protected against corrosion – it is made of galvanised steel and covered with a layer of powder coating.
close
WATER TUB

WATER TUB

WATER COLLECTION – THE OMFORT OF A DRY FLOOR

Racks and dryers with an open interior of the frame can be optionally equipped with a steel tub with a rubber mat, which serves for collecting water and dirt dripping from stored skis, snowboards or dried boots. The tub is made of galvanised steel, thus maintaining its resistance to corrosion. Adjusting the structure to the frames of the racks and dryers allows for easy removal and emptying. The use of the tub reduces moisture and dirt on the floor and in the area of the rail system.

TECHNOLOGIES_

DOUBLE PROTECTION
DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

FOUR VISUAL LINES
FOUR VISUAL LINES

DIVERSE DESIGN OF THE FRONT PANEL

ADJUSTMENT SYSTEMS
ADJUSTMENT SYSTEMS

OPTIMAL USE OF AVAILABLE SPACE

GRIP OF SKIS_ FORK SYSTEM
GRIP OF SKIS_ FORK SYSTEM

BY FAR THE MOST SPACEEFFICIENT HOLDING SYSTEM

ERGONOMIC SHELVES
ERGONOMIC SHELVES

MORE STORAGE POSSIBILITIES

RUNNING SYSTEM
RUNNING SYSTEM

SPACE SAVING, MOBILE & CONVENIENT

FRAME
FRAME

RIGID STRUCTURE, SAFETY OF USE

WATER TUB
WATER TUB

WATER COLLECTION – THE OMFORT OF A DRY FLOOR

YOU MAY LIKE ALSO_