PRODUCT DESCRIPTION_

Universal rack is the most capacious of all the racks and is composed of such elements as a frame, columns, two horizontal levels and ski forks. Each fork is coated with a special anti-slip rubber paint and can accommodate up to three pairs of skis. Height-adjustable horizontal levels enable the storage of skis of different sizes. The ski forks can be attached to the levels in any configuration depending on the type of the stored gear.

Product Datasheet QBL Catalogue Ski Rental & Service'24

SPECIFICATION_

LENGTH MM CAPACITY pairs of skis
1500 60
1800 72
2000 84
2400 108
3000 132
4000 168
close
DOUBLE PROTECTION

DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

The key elements of racks and dryers exposed to corrosion (such as frames, levels, angles or shelves, as well as depot lockers structures) are made of high-quality galvanised steel. During the final stage of production, all elements are subject to automated powder coating. Galvanised steel and a thick layer of coating provide double protection for the products against moisture. In addition, the rack structures have been designed to prevent water accumulation inside the
close
FOUR VISUAL LINES

FOUR VISUAL LINES

DIVERSE DESIGN OF THE FRONT PANEL

The main rack and dryer models are available in four different visual options which differ in the design of the front column. The Standard line is featured by a classic anthracite frontside, whilst the MiniPanel line by a modern white panel with a contrasting solid handle. The Panel line is distinguished by a wide, elegant board with an oval stainless-steel handle attached to it; the UniQ line offers unlimited possibilities for the selection of materials, which includes a delicate casing of a wide front column with a comfortable inner handle. The choice of different visual lines enables QBL products to be properly matched to the interior design and character of the facility in which they are used.
close
ADJUSTMENT SYSTEMS

ADJUSTMENT SYSTEMS

OPTIMAL USE OF AVAILABLE SPACE

QBL products are designed to allow, as much as possible, for the individual components to be adapter to the types and sizes of equipment they store. Thanks to smart functional solutions, adapting the location of the forks, adjusting the mounting height of the levels, shelves or aluminium crossbars is very simple and intuitive. Adjustment systems mean optimal use of the available space – which translates directly into increased storage capacity.
close
GRIP OF SKIS_ FORK SYSTEM

GRIP OF SKIS_ FORK SYSTEM

BY FAR THE MOST SPACEEFFICIENT HOLDING SYSTEM

The fork-based system is the most capacious way to store skis. The forks are made of 3mm-thick steel and four steel tubes to hang the skis on. The surface of the forks is covered with a rubber coat, which has anti-slip properties and effectively protects them from scratches. The forks are fixed at any distance on the steel levels – allowing maximum use of the available space on the rack. The structure has been designed in such a way that, thanks to the gentle slope of the steel tubes, the risk of equipment falling out during dynamic movement or collision of the racks is reduced. Each fork can safely store two to three pairs of senior skis.
close
RUNNING SYSTEM

RUNNING SYSTEM

SPACE SAVING, MOBILE & CONVENIENT

The running system of QBL products includes a rail set or a set of swivel casters. The rail set consists of stainless steel rails 2 or 3mm thick (depending on the length of the racks), connectors, rail endings, and 12 standard bearings attached to each frame of rack or dryer. The design of the rails and the number of bearings used guarantee smooth and safe movement of the products – even when fully loaded. The set of swivel casters includes four durable casters (with a diameter of 75, 80 or 125mm) which are selected according to the needs and the maximum possible load on the structure.
close
FRAME

FRAME

RIGID STRUCTURE, SAFETY OF USE

All racks and dryers in the rail system are equipped with a structural frame made of 3mm-thick steel, which is their load-bearing base and ensures the rigidity and stability of the entire system. The frame also acts as a running structure, ensuring safe and even guidance of products on the rails. The frame is double protected against corrosion – it is made of galvanised steel and covered with a layer of powder coating.
close
WATER TUB

WATER TUB

WATER COLLECTION – THE OMFORT OF A DRY FLOOR

Racks and dryers with an open interior of the frame can be optionally equipped with a steel tub with a rubber mat, which serves for collecting water and dirt dripping from stored skis, snowboards or dried boots. The tub is made of galvanised steel, thus maintaining its resistance to corrosion. Adjusting the structure to the frames of the racks and dryers allows for easy removal and emptying. The use of the tub reduces moisture and dirt on the floor and in the area of the rail system.

TECHNOLOGIES_

DOUBLE PROTECTION
DOUBLE PROTECTION

DURABILITY & PROTECTION AGAINST CORROSION

FOUR VISUAL LINES
FOUR VISUAL LINES

DIVERSE DESIGN OF THE FRONT PANEL

ADJUSTMENT SYSTEMS
ADJUSTMENT SYSTEMS

OPTIMAL USE OF AVAILABLE SPACE

GRIP OF SKIS_ FORK SYSTEM
GRIP OF SKIS_ FORK SYSTEM

BY FAR THE MOST SPACEEFFICIENT HOLDING SYSTEM

RUNNING SYSTEM
RUNNING SYSTEM

SPACE SAVING, MOBILE & CONVENIENT

FRAME
FRAME

RIGID STRUCTURE, SAFETY OF USE

WATER TUB
WATER TUB

WATER COLLECTION – THE OMFORT OF A DRY FLOOR

FRONT BOARD DECORS_

LR33

CLEAF

SABLÈ ABBEY

LR33

s072

Cleaf

SHERWOOD KENSINGTON PARK

s072

S120

Cleaf

PEMBROKE THAMES

S120

S060

cleaf

ENGADINA ADULA

S060

S061

Cleaf

ENGADINA BEVERIN

S061

S071

Cleaf

SHERWOOD GREENWICH PARK

S071

U129

Cleaf

MILLENNIUM NERO

U129

H1122

Egger

WHITEWOOD

H1122

H1176

Egger

EGGER WHITE HALIFAX OAK

H1176

H1180

egger

NATURAL HALIFAX OAK

H1180

H1113

Egger

BROWN KANSAS OAK

H1113

H3058

Egger

MALI WENGE

H3058

H1487

Egger

Bramberg Pine

H1487

H3309

Egger

Gladstone Oak

H3309

H3331

Egger

NATURAL NEBRASKA OAK

H3331

H3430

Egger

White Aland Pine

H3430

YOU MAY LIKE ALSO_